DEFINITION
It is a cement-based, single-component, polymer-reinforced, high-stability surface smoothing and filling mortar.
usage areas
It is used for leveling gross concrete elements with all kinds of surface irregularities. It is used in all kinds of industrial reinforced concrete structures, engineering structures such as subways, highways and dams, repair, repair and reinforced concrete reinforcement projects, parking lots, shopping malls, and repair of prefabricated elements.
ADVANTAGES
It is mixed with water. Provides a smooth surface finish. It has excellent adherence on concrete and plastered surfaces. It creates a crack-free appearance on large surfaces. There is no need for primer and it is easy to apply.
SURFACE PREPARATION
Surfaces must be clean, smooth, solid, and free from all kinds of dust, oil, dirt, rust, mold oil, detergent, etc., and similar substances and wastes that prevent adhesion. Weak parts on the surface should be removed. Cement slurry and weakened parts should be removed, and there should be no materials such as oil, dirt and rust on the surface. Absorbent surfaces should be wetted beforehand, but there should be no puddles or drops left.
INSTRUCTIONS FOR USE
8.5lt of it taken at normal ambient temperature into a clean container free of any substances that prevent adhesion. Clean, clear water is added. In powder form in a container filled with water, in a 20 kg bag. NESCOAT CEMENT BASED CORRECTION PASTE THICK, is poured. It is mixed with a low speed mixer until a homogeneous mixture without lumps is obtained. Mixing time is minimum 5 minutes. should be. The mortar obtained at the end of the process is kneaded for 3 minutes. rest and repeat for 2 minutes. It should be mixed until it becomes homogeneous. After the material reacts, it should not be mixed again by adding water. The prepared mortar is applied to the concrete surface by scraping with a steel trowel. Then, the required amount for leveling is applied to the surface. Wall thickness 5 mm. Applications thicker than 100 cm should be done in layers.
PACKAGING
It is a 20 kg kraft bag. (PE reinforced)
64 bags with shrink wrap on a pallet (106×106 cm).
