DEFINITION
It is a cement-based, polymer-added thermal insulation board adhesive used to bond thermal insulation boards (EPS, XPS, rock wool, etc.) to surfaces such as concrete, brick, aerated concrete.
usage areas
Residences, shopping malls and hospitals. For horizontal, vertical and overhead applications. On any mineral surface. It is used to adhere thermal insulation panels on exposed concrete, brick and aerated concrete in interior and exterior spaces. It can also be used as a general adhesive in applications other than sheathing.
ADVANTAGES
It is easy to apply and shape. It has high resistance to all kinds of climatic conditions. It is long lasting. It has vapor permeability. It is not flammable.
SURFACE PREPARATION
Surfaces must be clean, smooth, solid, and free from all kinds of dust, oil, dirt, rust, mold oil, detergent, etc., and similar substances and wastes that prevent adhesion. Surfaces must be smooth and weak parts must be removed. If there are cracks or holes on the floor or wall to be applied, they should be repaired with appropriate NESCOAT repair mortars. The surface on which it will be applied should be slightly moistened beforehand. There should be no wetness or puddles. If there are many irregularities on the ground, fine or rough plaster must be applied beforehand.
INSTRUCTIONS FOR USE
25 kg of NESCOAT THERMAL INSULATION BOARD ADHESIVE is slowly poured into 6-7 liters of water at ambient temperature between +5°C and +35°C and mixed with a low speed mixer (400-600 rpm) until a homogeneous mixture is obtained. -Mixed for 5 minutes. After the prepared mortar rests for 5-10 minutes, it is mixed for another 1-2 minutes before application. NESCOAT THERMAL INSULATION BOARD ADHESIVE is applied to the edges of the insulation board to frame it and to the middle part with a point trowel. The mortar applied plate is adhered to the wall by pressing it. Care should be taken not to spill adhesive into the joints. The prepared mortar is consumed within 3 hours, expired mortar cannot be applied. Depending on the ambient temperature and surface conditions, mechanical doweling should be done at least 24 hours later.
PACKAGING
It is a 25 kg kraft bag. (PE reinforced)
64 bags with shrink wrap on a pallet (106×106 cm).
STORAGE AND SHELF LIFE
It should be placed in its unopened original packaging, in a cool and dry environment, with a maximum of 2 pallets on top of each other. Shelf life is 12 months from the production date under appropriate storage conditions. Pallet should be placed. Shelf life is 12 months from the production date under appropriate storage conditions.
SAFETY RULES
Gloves should be used during use. In case of contact, the affected area should be washed with plenty of water. If swallowed, consult a doctor immediately.
