USAGE AREAS
In priming concrete surfaces, cement screeds and epoxy mortars, on normal, glossy and highly absorbent surfaces, as a primer before all epoxy and polyurethane floor coatings, as a binder for epoxy-based leveling mortars and mortar coatings.

ADVANTAGES
It has low viscosity, good penetration properties, high adhesion power, does not contain solvents, is easy to apply, has short waiting times between coats, is multi-purpose, and can also be used outdoors.

SURFACE PREPARATION
The application surface must be clean and dry from all kinds of dust, dirt, weak and loose particles, cement slurry residues, oil and grease. The concrete subsurface must be clean, solid and have sufficient compressive strength (at least 25 N/mm²), and its tensile strength (pull-off) must be at least 1.5 N/mm².

INSTRUCTIONS FOR USE
After adding component B to component A, mix with a low-speed electric mixer (maximum 400 rpm) for 1-2 minutes until a homogeneous color is obtained. Make sure a continuous, non-porous layer covers the surface. If necessary, apply two coats of primer. NESCOAT TRANSPARENT EPOXY FLOOR PRIMER can be applied by brush, roller or spraying.

PACKAGING
SET:A) Component: 10 kg.
B) Component: 5 kg. tin bucket

STORAGE AND SHELF LIFE
It should be placed in its unopened original packaging, in a cool and dry environment, with a maximum of 2 pallets on top of each other. Shelf life is 12 months from the production date under appropriate storage conditions.