usage areas
It is used as a repair mortar in the repair and plastering of surfaces such as exposed concrete and prefabricated concrete on interior and exterior facades.

ADVANTAGES
It creates a smooth and solid surface. Once set, it is resistant to frost, water and harsh weather conditions. It can be applied up to 1-5 mm thickness.

SURFACE PREPARATION
The application surface must be clean and free from loose surfaces and dust that may prevent adhesion. The surface must be moistened before application.

INSTRUCTIONS FOR USE
25 kg of NESCOAT FINE REPAIR MORTAR is slowly poured into 6 - 6.5 liters of water at an ambient temperature between + 5°C and + 35°C, using a low speed mixer (400-600 rpm) until a homogeneous mixture is obtained. mixed with . After the mortar rests for 5-10 minutes, it is mixed for another 1-2 minutes before application. The prepared mortar should be filled with a steel trowel by applying pressure to the area to be repaired and applied to the entire surface in equal thickness, not exceeding 5 mm. The mortar should be consumed within 45 minutes. The surface should be smoothed with a damp sponge and the surface should be moistened at intervals for 24 hours after application. Expired and crusted mortar should not be used.

PACKAGING
It is a 25 kg kraft bag. (PE reinforced)
64 bags with shrink wrap on a pallet (106×106 cm).

STORAGE AND SHELF LIFE
It should be placed in its unopened original packaging, in a cool and dry environment, with a maximum of 2 pallets on top of each other. Shelf life is 12 months from the production date under appropriate storage conditions.